Coatings to protect strain gauge installations

Part no

Description

 
GAK1 RTV White Adhesive silicone sealant 310ml cartridge. Use with Applicator APPG-2 GAK1 coating
GAK2 RTV translucent adhesive sealant 310ml cartridge. Use with Applcator APPG-2  
GAK3

Flexible transparent acrylic lacquer. For protection of strain gauge installations.Excellent adhesion. Resistant to mould growth. Flouresces under UV light which aids inspection. Temp range -55°C to +130°C. Drying time 10-15min.
Brush applicator bottle 15ml

GAK8 coating
 

GAK6,6R,7&7R Supplied in 5m packs

GAK6 & 7
GAK6 Black butyl mastic coating. Used primarily as a base layer for GAK6R to form a low profile, waterproof installation. GAK6
GAK6R Rubber coated black butyl mastic.
Ideally suited for field application or installation requiring long term water immersion. Tested in water @200 bar for 100hrs.
Temp range: long term -30 to +90°C
Short term: -70 to +120°C
UV stable, Life span >30 years
GAKrR coating
GAK7 White butyl mastic coating. Used primarily as a base layer for GAK7R to form a tough waterproof installation GAK7 coating
GAK7R
White rubber coated butyl mastic.
Ideally suited for field application or installation requiring long term water immersion. Tested and used at water pressures exceeding 400bar cold & 100bar at 100°C in water & 55/50 water Ethylene glycol mix for 100 hours.
Temperature range:
Long term -60 to +120°C
Short term -70 to 130°C
GAK7R coating
GAK8 Water based acrylic lacquer.
Non-flammable, contains no organic solvents. Abrasion resistant when cured. Solvent resistant. Flouresces under UV light.
Temperature range:-60 to +170°C (short term)
15ml Brush cap bottle
GAK8 coating
GAK10 High performance coating/adhesive.
Excellent flexibility. High shear & peel strength. Outstanding chemical & fluid resistance. Bonds to metals, glass, wood, rubber & many plastics. Temp range -75°C to +150°C. This product has been successfully used for sealing plugs & glands for deep sub-sea use.
50ml duo cartridge. Use with Applicator APPG1
GAK10
GAK-1008 MS Polymer adhesive sealant/protective coating.
Forms a tough rubber coating. May be applied under water.
300ml tubes.
GAK1008
DP1009 High strength, fast cure adhesive.
Duo cartridge. Use with applicator APPG1
DP1009
DP1073 High Strength polymer adhesive. DP1073
MGPU-1 Marine grade polyurethane resin.
Low water absorption & high resistance to sea water. High toughness & tear resistance. Good adhesion to most substrates. 200g
MGPU1
MGPU-2 Slow cure marine grade polyurethane resin.
Low water absorption & high resistance to sea water. High toughness & tear resistance. Good adhesion to most substrates. 200g
MGPU2
APPG1 Applicator tool for use with duo syringe type GAK10 & DP1009 Applicator1
APPG2 Applicator tool for use with GAK1 & GAK2

Applicator2

     

 

images may differ from actual products and are for information only. For prices & availability please contact us

Back to Top